几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

timber to timber moment connections
any information on timber to timber moment connections would be appreciated
find a job or post a job opening
i always go by the rule that you should try to avoid them at all cost. i am not sure your application which would help in answering this topic. if you are trying to do a moment resisting frame, that would be a bad idea. i have seen cantilevers work well.
the problem with moment connection is that wood changes shape over time. it shrinks or grows depending on moisture content. this would lead to slop in your connection and you will not get a true moment connection.
craig
here are two recent threads on this subject
crigory28, rule is very good advice!!! also what happens in most cases is that you get some deflection before the fastners start taking up the load.

2009-09-16, 02:50 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	imber to timber moment connections timber to timber moment connections any information on timber to timber moment connections would be appreciated find a job or post a job opening i always go by the rule that you should try to avoid them at all cost. i am not sure your application which would help in answering this topic. if you are trying to do a moment resisting frame, that would be a bad idea. i have seen cantilevers work well. the problem with moment connection is that wood changes shape over time. it shrinks or grows depending on moisture content. this would lead to slop in your connection and you will not get a true moment connection. craig here are two recent threads on this subject crigory28, rule is very good advice!!! also what happens in most cases is that you get some deflection before the fastners start taking up the load. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]