几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

vertical rebar and dowels
can vertical rebar extend into the footing to serve also as dowels, thus, eliminating one step in the fabrication process? why or why not?
would this force too high of a load "into" the near bottom of the footing, as opposed to being distributed more onto the top of the footing?
thank you!
this is done quite often. really, the only reason for the dowels is construction effeciency so that vertical bars can be spliced. standing a 8' or longer bar in a footing is not that easy and if you are using block on the footing, the mason would have "thread" the block over the bar. dowels are just quicker.
a correctly spliced bar carries the same load.

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]

2009-09-16, 06:21 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	vertical rebar and dowels vertical rebar and dowels can vertical rebar extend into the footing to serve also as dowels, thus, eliminating one step in the fabrication process? why or why not? would this force too high of a load "into" the near bottom of the footing, as opposed to being distributed more onto the top of the footing? thank you! this is done quite often. really, the only reason for the dowels is construction effeciency so that vertical bars can be spliced. standing a 8' or longer bar in a footing is not that easy and if you are using block on the footing, the mason would have "thread" the block over the bar. dowels are just quicker. a correctly spliced bar carries the same load. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]