几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

wood frame construction- 120 wind speed
i would like to design a house that has a 14' plate height and that has portions of the roof with 16 on 12 slopes. i am trying to use the wfcm to design but i don't see any allowances for these criterias. if i cannot use the wood frame manuel what other code could i use to be able to use 14' plates and 16 on 12 slopes.
any help would be gladly appreciated.
thanks,
benarch
you should be able to desing it using ibc and nds for timber.
you might have to do some actual structural engineering!
if you cant find tables then you will have to do it from scratch using asce7 for the wind loads and the timber code for the members. it is not actually that hard once you know how to do it.

2009-09-16, 10:51 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	wood frame construction- 120 wind speed wood frame construction- 120 wind speed i would like to design a house that has a 14' plate height and that has portions of the roof with 16 on 12 slopes. i am trying to use the wfcm to design but i don't see any allowances for these criterias. if i cannot use the wood frame manuel what other code could i use to be able to use 14' plates and 16 on 12 slopes. any help would be gladly appreciated. thanks, benarch you should be able to desing it using ibc and nds for timber. you might have to do some actual structural engineering! if you cant find tables then you will have to do it from scratch using asce7 for the wind loads and the timber code for the members. it is not actually that hard once you know how to do it. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]