几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子 - i have a rather weird problem and i'm not sure if anyone knows what it may be or perh

strange!?!?!
hey guys,
i have a rather weird problem and i'm not sure if anyone knows what it may be or perhas someone here has had this happen.
basically, my machine stays on 22 hours a day. i have never really had any software related issues with the exception of the regular version bugs and the occasional doc watson misha.
we reboot each morning, and yesterday, i found that when we went to do the regular qualification, i couldn't because my probe file had comlpetely disapeared! i initially thought that perhas someone deleted it from the program directory, but the file itself was still there, it just didn't have any data in it. so, i reboot again, and find that this is not the fix.
after rebuilding the probe file, and cursing for a few minutes, i am ready to qualify only to find that my qualification tool files have also been munched!!
i reboot, again not the fix, so i curse some more and create a new tool. i run qualification but i get a few strange error messages before i can commence, but everything goes smoothly.
just for my own masocistic ways, i decide to reboot the machine again, when i go back, my qualification tools are gone again!!!
my first thought is, virus, sy, etc. so i comletely take c off of network, get rid of everything unnecessary and run syware and adware swees, virus scan, and i install a personal firewall on the machine.
unfortunately, all of the swees were clean, which really makes messes me u now, as i have nothing that i can point at.
if anyone has any ideas, or can share their experiences, that would be great!!!
running 3.5 mr2 on b&s xcel 7-10-7 w/ windows x s2
thanks,
sounds like your hard drive might be starting to crash. perhas the sectors of the drive that contain your pc-dmis program have become corruted as a result. have you tried reinstalling the pc-dmis program?
have you it eole try scanning your hafrd drive for bad sectors as well.
try deleting all of your probe files from your pc-dmis directory or where ever they are stored and rebuild the files from scratch. i believe they may have become corrupted an pc-dmis is trying to comensate the only way it knows how.
i've had similar problem-when my program would disapeer!!!

2009-04-06, 10:55 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	i have a rather weird problem and i'm not sure if anyone knows what it may be or perh strange!?!?! hey guys, i have a rather weird problem and i'm not sure if anyone knows what it may be or perhas someone here has had this happen. basically, my machine stays on 22 hours a day. i have never really had any software related issues with the exception of the regular version bugs and the occasional doc watson misha. we reboot each morning, and yesterday, i found that when we went to do the regular qualification, i couldn't because my probe file had comlpetely disapeared! i initially thought that perhas someone deleted it from the program directory, but the file itself was still there, it just didn't have any data in it. so, i reboot again, and find that this is not the fix. after rebuilding the probe file, and cursing for a few minutes, i am ready to qualify only to find that my qualification tool files have also been munched!! i reboot, again not the fix, so i curse some more and create a new tool. i run qualification but i get a few strange error messages before i can commence, but everything goes smoothly. just for my own masocistic ways, i decide to reboot the machine again, when i go back, my qualification tools are gone again!!! my first thought is, virus, sy, etc. so i comletely take c off of network, get rid of everything unnecessary and run syware and adware swees, virus scan, and i install a personal firewall on the machine. unfortunately, all of the swees were clean, which really makes messes me u now, as i have nothing that i can point at. if anyone has any ideas, or can share their experiences, that would be great!!! running 3.5 mr2 on b&s xcel 7-10-7 w/ windows x s2 thanks, sounds like your hard drive might be starting to crash. perhas the sectors of the drive that contain your pc-dmis program have become corruted as a result. have you tried reinstalling the pc-dmis program? have you it eole try scanning your hafrd drive for bad sectors as well. try deleting all of your probe files from your pc-dmis directory or where ever they are stored and rebuild the files from scratch. i believe they may have become corrupted an pc-dmis is trying to comensate the only way it knows how. i've had similar problem-when my program would disapeer!!! __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]