几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - calculation method of the profile

		几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)\|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间：产品设计或CAX软件使用 » CMM检测 » PC-DMIS
calculation method of the profile

标记论坛为已读

搜索本主题

2009-08-16, 08:01 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	calculation method of the profile From section 6.5.3 Explanation of Profile Tolerance in ASME Y14.5M-1994 "Dimensioning and Tolerancing": “The tolerance value represents the distance between two boundaries equally or unequally disposed about the true profile or entirely disposed on one side of the true profile.” Please also refer to Section 6.5 Profile Control of ASME Y14.5.1M-1994 "Mathematical Definition of Dimensioning and Tolerancing Principles". ASME Y14.5.1M-1994 specifies the profile tolerance value as the sum of t+ (the tolerance disposed in the positive direction) and t- (the tolerance disposed in the negative direction), where t+ and t- are positive values. This is what PC-DMIS normally reports. For ISO 1101, the tolerance value is the diameter of a sphere centered on the surface, so in this case the tolerance value would be 2 times the maximum deviation. Starting in V40, we added a registry setting to allow users to report the profile result as 2 times the maximum deviation. This registry setting is Option\UseISOCalculations. You can use the settings editor for V40+ to set UseISOCalculations to 1 if you want the profile results reported as 2 times the maximum deviation. This setting is used only for reporting the profile tolerance value. PC-DMIS does not pass bad parts. The out-of-tol value is calculated based on the max deviation versus the upper tolerance and the min deviation versus the lower tolerance. So parts that violate the users +/-tol value will be flagged as out-of-tol regardless of how the measured value was calculated. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]

GDT自动化论坛（仅游客可见）

2009-08-16, 08:01 PM	#2
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	回复: calculation method of the profile 隐藏帖您没有登陆，无法查看此帖内容，请登陆或注册。此帖为财富帖,只有拥有 100标准币以上的会员才可查看此帖 __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]

2009-08-16, 08:18 PM	#3
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	回复: calculation method of the profile 隐藏帖您没有登陆，无法查看此帖内容，请登陆或注册。此帖为资历帖,只有帖子数 10 以上的会员才可查看此帖 __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]

« 上一主题 | 下一主题 »

主题工具	搜索本主题
显示可打印版本发送本页给好友	搜索本主题: 高级搜索
显示模式
平板模式切换到混合模式切换到树形模式

发帖规则
您不可以发表新主题您不可以回复主题您不可以上传附件您不可以编辑您的帖子 vB 代码开启表情图标开启 [IMG]代码开启 HTML代码关闭

相似的主题
主题	主题发起者	论坛	回复	最后发表
【转帖】olerance profile surface or profile line	yang686526	American standards	0	2009-05-04 10:51 AM
【转帖】profile of surface vs profile of line	yang686526	American standards	0	2009-04-29 09:29 PM
【转帖】asme - where to star	yang686526	American standards	0	2009-04-29 07:28 PM

所有的时间均为北京时间。现在的时间是 04:08 AM.

沪ICP备06057009号-2

更多