yang686526

exception in oddbspline::getarea()
exception in oddbspline::getarea()
i am using dd 1.14.02 libs.
the code:
code:
oddbsplineptr pspline = oddbspline::createobject();
odgedoublearray weights;
pspline->setnurbsdata( 3, // degree
false, // rational
true, // closed
false, // periodic
controlpoints, // control points
knots, // knots
weights, // weights
1.0000e-10, // control point tolerance
1.0000e-10); // knot tolerance
odgematrix3d matrix;
matrix.settoscaling(0.013888898047845547);
pspline->transformby(matrix);
double area = 0;
odresult result = pspline->getarea(area);
/*
controlpoints =
{
{306.63769531250000, 395.45605468750000, 0.00000000000000000},
{306.63574218750000, 395.46972656250000, 0.00000000000000000},
{306.63330078125000, 395.49121093750000, 0.00000000000000000},
{306.62939453125000, 395.49121093750000, 0.00000000000000000},
{306.62207031250000, 395.49511718750000, 0.00000000000000000},
{306.62597656250000, 395.47949218750000, 0.00000000000000000},
{306.63769531250000, 395.45605468750000, 0.00000000000000000}
};
knots =
{
0, 0, 0, 0, 1, 1, 1, 2, 2, 2, 2
};
weights = {}; // empty
*/
when executed, results in getarea() throwing an einvalidinput exception. the relevant call stack is:
code:
kernel32.dll!7c81eb33()
[frames below may be incorrect and/or missing, no symbols loaded for kernel32.dll]
kernel32.dll!7c81eb33()
...!odrefcounter:perator--() line 295 + 0x10 bytes
...!odrxobjectimpl<oddefaulterrorcontext,oddefaulterrorcontext>::release() + 0x37 bytes
...!odsmartptr<oddefaulterrorcontext>::release() + 0x20 bytes
e06d7363()
...!odgevector3d::normalize() + 0x37 bytes
...!odgeplanarent::set() + 0x53 bytes
...!odgeplane::set() + 0x17 bytes
...!odgepolyline3d::isplanar() + 0x167 bytes
...!odgepolyline3d::area() + 0x5e bytes
...!odgecurve3d::area() + 0x78 bytes
...!oddbspline::getarea() + 0x16a bytes
if i skip pspline->transformby(matrix) then no exception is generated and i get area = 0.00016050263399227611 with result = eok.
what am i doing wrong?
regards,
varun
last edited by varunsnair; 3rd may 2006 at 10:29 pmfff">.
hi dd guys,
any pointers on this?
thanks,
varun
this is a bug (tolerance issue) in odgepolyline3d::isplanar. it will be fixed in the next release.
vladimir
any dates set for next release yet?
regards,
varun