几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-07, 10:12 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 called to do hud inspection

called to do hud inspection
we have been getting calls to do hud inspections of modular homes and we have been turning them down. i downloaded the 400 page hud manual and it seems like quite a bit of material to digest and a long checklist is required to be completed before writing a short report.
we are a structural engineering consulting firm. we are thinking about starting to do these inspections. however, we are worried about the learning curve. how long did it take you to get up to speed? what is the going rate (range) for these inspections? can you make a profit on these or do you go in the hole everytime?
find a job or post a job opening
are you talking about modular homes or manufactured homes (often called mobile homes or trailers).
i think it can be good work, after you have done a few. most of the time, these houses do not meet the hud standards, which unfortunately means the prospective homebuyer cannot get their hud loan.
you cannot get a very big fee for one of these inspections--$300 to $500, i am thinking.
daveatkins
archeng,
yes, mobile homes/manufactured housing. "trailer homes" is not politically correct.
dave,
if they can't get the loan, how do you get paid. do you ask for the money up front before the inspection? tying it to a closing cost fee might mean that you don't get paid.
you are about correct on the pricing, except that i charge an extra fee to re-inspect if the home fails. (all flat fees, no mileage etc)
yes there is a good learning curve, but once you are through this it is not too bad. think of it like a mortgage survey, you need to do a lot to work them efficiently. i didn’t make money on them until i had the first 5-6 under my belt.
few of the homes i find match the foundation types in the hud manual.
for a "good" installation, it typically takes 5-6 hours to make all the contacts, write contracts, visit the home, write the report, record the billings. i ask for payment upfront for these, and for all other inspections related to a real-estate transaction.
fyi, the most recent one, i waited on site for an extra hour while the owner ran to the hardware store. there were three tags under the unit, with the words "place post/column" here, but no post......
the worst one, i spent 12 hours of work on. i felt sorry for the little old lady. she had a "foundation plan" from the original installation. the plan was prepared by an unlicensed "engineer". at the end of the day, and using a very, very sharp pencil, i was able to give her the certification for the loan. (with disclaimers) but i also told her that in a bad storm, i would rather see her go to her garage, as it was built better.
bottom line, there is money here, but it is not easy money. plus there is a real need for this work to be done.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
inspection symbols with gd huangyhg tec-ease(America) 0 2009-09-05 11:23 AM
【转帖】measuring gd yang686526 American standards 0 2009-04-29 08:48 PM
【转帖】inspection symbols with gd yang686526 American standards 0 2009-04-29 08:32 PM
【转帖】asme美国机械工程师标准目录2 huangyhg American standards 5 2009-04-26 02:38 PM
PC-DMIS Inspection Planner huangyhg PC-DMIS 0 2006-12-04 11:09 PM


所有的时间均为北京时间。 现在的时间是 04:39 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多