几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-08, 08:16 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 eccentric loads on pad foundations

eccentric loads on pad foundations
can anyone help with the formula for bi-eccentric reactions on pad or mat type foundations to calculate max gbp?
hi..
i think it is
qmax = p/(b*l) + 6mx/(b*l^2)+ 6my/(l*b^2)
qmin = p/(b*l) - 6mx/(b*l^2) - 6my/(l*b^2)
which l= length of footing // to x axis
b = length of footing // to y axis
alright?
that looks right so long as the resultant is in that diamond shape in the middle of the raft which puts it in the middle third on either of the axes i.e.6x/l + 6y/b <1. in other words, the whole of the raft has a positive bearing pressure on the ground. if the resultant is outside the diamond, then i think it gets a whole lot more complicated!
r
aashto standard specification for highway bridges (16 edition) has figure 4.4.7.1.1c p. 53 for contact pressure for footing loaded eccentrically about two axes.
similar info may be found in area manual for railway engineering.
send me your e-mail address and i will try to send you this info.
thanks chaps however i may not have given you the whole story. pop2514's equation is correct as long as the eccentricity falls within the kern (full marks to richard m). i was looking at the more complex area where, as whymrg points out, it seems to get tricky. i have always used tables for this region (teng) which are based on us area docs.
if you study these closely, bi eccentricity introduces a more or less constant 0,84 factor to pop2514's equation. i just cant figure out why or how that balances out. obviously i dont want to resort to graphical methods for rectangular pads. someone must know!
do you have any further advice ---tia
your problem just requires a bit of programming and you have it solved by fem and ready for examination in my sheets foot_rect.mcd and foot_circ.mcd in the mathsoft collaboratory (rectangular and circular footings subject to eccentrical in x and y compression).
by using compression only springs and adequate model with plates you can get also an answer for a footing of any shape through any modern fem structural analysis having such elements.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
design of foundations for dynamic loads huangyhg 产品功能分析 0 2009-09-08 05:39 PM
design build pemb foundations huangyhg 产品功能分析 0 2009-09-08 05:13 PM
bearing pad design for horizontal loads huangyhg 产品功能分析 0 2009-09-07 03:16 PM
are asce 7-02 wind loads ultimate or service level huangyhg 产品功能分析 0 2009-09-07 12:46 PM
【转帖】rotated Dimension And Dimassoc Problem yang686526 DirectDWG 0 2009-05-07 03:11 PM


所有的时间均为北京时间。 现在的时间是 02:15 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多