几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


 
 
主题工具 搜索本主题 显示模式
旧 2009-09-08, 10:34 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 enr article stirs up designers

enr article stirs up designers
apparently, the agc has issued a new set of contract documents for use in the construction industry. a description of the documents (and specifically those involved in creating them) can be found here:
i had read the article in enr and it certainly seemed to say everyone but the architect's were on board. glad to see this clarified. i wonder if the letter will actually make the magazine.

don phillips
fyi, the letter was published in this week's enr.
don phillips
quote from the home page of enr.construction.com:
"enr covers the news of the construction industry from concept to collapse and everything in between."
it seems that enr (engineering news record) should be renamed to cnr as they seem to be catering a lot more to contractors than to engineers...
i have read enr since 1987 and there is no doubt it is a magazine for contractors. i read it for the articles.
don phillips
what contractor writes contract documents?
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
 


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
enr article on nists wtc 7 repor huangyhg 产品功能分析 0 2009-09-08 10:34 PM
enr article on insurance threa huangyhg 产品功能分析 0 2009-09-08 10:33 PM
big dig designers asked to reduce bolts huangyhg 产品功能分析 0 2009-09-07 03:46 PM
aashto article 10.24.6.1 - fastener sealing huangyhg 产品功能分析 0 2009-09-07 09:19 AM
【转帖】asme美国机械工程师标准目录2 huangyhg American standards 5 2009-04-26 02:38 PM


所有的时间均为北京时间。 现在的时间是 04:32 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多