几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


 
 
主题工具 搜索本主题 显示模式
旧 2009-09-09, 03:09 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 green roof

green roof
does anyone know of a good reference for structural design of a green roof?
i have a lot of concerns since i have never done it before and would like to read about the latest research.
- such as the roof freezing in winter which could cause lots of ponding.
thanks,
craig
craig, i have never designed or been involved in one until recently. and my involvement is as the owners rep on the project. the project is out for bids now.
i questioned the designers extensively. and i'm not totally sure they know what they are doing. but i'm told the following is critical or at least beneficial:
use an engineered lightweight soil mix, with a high drainage value that precludes ponding. (still seems odd to buy dirt but there are places that sell it for this purpose.)
slope the deck for positive drainage.
you may need an irregation system since the soil mix will not hold moisture for days on end.
you may need to research vendors for a adequate waterproof membrane and protection system. my project is using a system by furnished by "hydrotech usa" and includes a mambrane, root barrier protection, non-woven prefabricated crush proof air layer filter fabric, mositure retention mat, and a drainage/retention panel.
the system vendor's should have lots of information specific to your project.
if you have the leed design manual, check that under any sections that reference green roofs. they have a very good reference listing at the end of each section.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
 


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
green roof live load huangyhg 产品功能分析 0 2009-09-09 03:09 PM
green roof design huangyhg 产品功能分析 0 2009-09-09 03:08 PM
flat roof repairs huangyhg 产品功能分析 0 2009-09-09 12:23 PM
asce figure 6-10 wind loads huangyhg 产品功能分析 0 2009-09-07 01:22 PM
a flat roof huangyhg 产品功能分析 0 2009-09-07 09:05 AM


所有的时间均为北京时间。 现在的时间是 06:46 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多