几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


 
 
主题工具 搜索本主题 显示模式
旧 2009-09-10, 10:49 AM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 live load for parking garages ubc 1976

live load for parking garages ubc 1976
can anyone out there tell me what the live load (uniform and concentrated) is for passenger vehicle type parking garages per the 1976 ubc. the oldest ubc we have in my office is 1988, which calls out a 50-psf uniform load and concentrated wheel load of not less than 2000 pounds without uniform live loads.
thanks in advance.
check out our whitepaper library.
i do not have the '76 either, but do have the '73.
table 23-a on page 135 shows 50 psf for private pleasure car storage with a concentrated load of not less than 2000 pounds without uniform live loads. note 3 of the table refers you to section 2302(b) for the concentrated load.
the same table shows 100 psf for general storage and/or repair with the same reference foir the concentrated load. however, the same note, since the vehicles may be other than pleasure cars, to use the greater of 2000 pounds, or 40% of the gross weight of the maximum vehicle size to be accommodated.
since this code is before '76, and is similar to '79, the '76 is probably the same. you can tell if the '76 was different than the '79 by the vertical bars placed by the side of the paragraphs changed. if you like, i can scan and post the pages for you to read.
mike mccann
mmc engineering
thank you for your help.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
 


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
live load deflection huangyhg 产品功能分析 0 2009-09-10 10:48 AM
floor live load reduction ubc 97 huangyhg 产品功能分析 0 2009-09-09 12:47 PM
effects of a load on sog and below grade huangyhg 产品功能分析 0 2009-09-08 09:45 PM
1997 ubc load combinations huangyhg 产品功能分析 0 2009-09-06 10:50 PM
100 or 100 = 25 huangyhg 产品功能分析 0 2009-09-06 10:27 PM


所有的时间均为北京时间。 现在的时间是 01:16 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多