几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-16, 01:24 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 est masters structural review course

test masters structural review course
i am taking the structural i pe exam and would appreciate the advice of any pe's that may have taken it prior to their pe exam. is it worth it? 4 days of review for $595 with no guarantee of passing.
find a job or post a job opening
well, to be honest, i would have to wonder about any review program that offered to guarantee that an applicant would pass a professional exam! most of them give reduced costs for repeat victims. i did not use the program you mentioned, but the one in california run by ..perhaps i had better not name names. some of the lecturers they had were very good, some were very poor, some of them read from the books that were provided as a part of the 6 or 700 dollar cost of the review program. the books themselves were not updated to curent code, and therefore for the california exam often almost useless. the theory was that if you undersood the method, the outdated code references did not matter but that was not true. most of the exam in california is code based and if you are not familiar with the current code you are dead meat. i tabbed my code and relevant manuals. i did solve the problems in the books, but if i had to do it over again i am not sure i would waste the money or the saturdays for the lecture part of the review course.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
structural ii huangyhg 产品功能分析 0 2009-09-16 11:25 AM
shop drawing review huangyhg 产品功能分析 0 2009-09-15 10:18 PM
retraining as a structural engineer huangyhg 产品功能分析 0 2009-09-15 06:45 PM
pe structural i or civil huangyhg 产品功能分析 0 2009-09-15 11:54 AM
how to handle see structural drawings huangyhg 产品功能分析 0 2009-09-09 05:48 PM


所有的时间均为北京时间。 现在的时间是 07:02 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多