几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-16, 05:17 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 unlevel floors

unlevel floors
without proper inspection and study it is difficult to say.
if it is a problem of foundations, it will be dearer to get it straight. it may not be, since you don't name cracks, and these use to appear with noticeable settlements causing problems.
were there soil problems, a geotechnical investigation would be required.
but if only sloppy construction, and there being a basement it looks you would be able to add to the present structure as to perform any leveling reform even with some weight increase, at some cost that only after having a proper solution one is able to know.
coat,
most likely anything can be fixed, especially in wood framed residential buildings. what is important (as ishvaag stated above) is to understand what has caused this irregularity in the floor and make sure it isn't a foundation issue.
all can be fixed, but at varying costs. if you are serious about the house, hire an engineer for an hour to provide a quick, initial observation as to what's going on.
insurance via pocket protector!
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
structural clay tile floors and bearing walls huangyhg 产品功能分析 0 2009-09-16 11:00 AM
info on sheffield beam tile floors huangyhg 产品功能分析 0 2009-09-09 07:37 PM
conventional wood frame construction - 7 floors - feasible huangyhg 产品功能分析 0 2009-09-08 01:50 PM
brick arch floors huangyhg 产品功能分析 0 2009-09-07 04:46 PM
bouncy floors huangyhg 产品功能分析 0 2009-09-07 04:31 PM


所有的时间均为北京时间。 现在的时间是 06:49 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多