几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-16, 08:24 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 what is the allowable deflection for shoring piles

what is the allowable deflection for shoring piles?
hi,
i was always wondering if there is any code recomended allowable deflection for the shoring piles (mostly residential buildings).
i do have the "shoring and trenching manual" of caltrans which recomends %0.2 of wall height. but this seems to be a very stringent requirement.
does anybody have any other reference material with this regard?
thank you
vanik,
the limit depends on
1) the strength and stiffness of your shoring system
2) what the person working in the pit will tolerate
obviously, the more deflection, the closer you are getting to the limit state of your system.
jeff
all though there is no hard and fast rule on this, i try to keep deflections under 1". if you have too much deflection, you start to get secondary effects that are not really accounted for in the design. this agan is not any code, but my own personal preference. note that deflection calculations for sheeting are more of an estimate than a precise calculation.
dear friend
maybe there is some codes for shoring deflections, but it is better to make a caculated negative deflection for shoring in such away that you don't have any downward deflection after deassembling og of shorings.
this should be done specialy for larg spans.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
sloped steel joist design - allowable girder deflection huangyhg 产品功能分析 0 2009-09-15 11:46 PM
global or local beam deflection huangyhg 产品功能分析 0 2009-09-09 02:42 PM
deflection of beam supporting a concrete slab huangyhg 产品功能分析 0 2009-09-08 04:57 PM
brick cladding deflection limits huangyhg 产品功能分析 0 2009-09-07 04:48 PM
allowable beam deflection huangyhg 产品功能分析 0 2009-09-07 10:50 AM


所有的时间均为北京时间。 现在的时间是 05:13 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多