几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-08, 06:05 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 design wind speed on long island, bahamas

design wind speed on long island, bahamas
does anyone know the design wind speed on long island in the bahamas? i've googled, searched the bahamas government website, and called, all to no avail.

see attached from pan american health organization, based on asce 7 for carribean islands (technically, long island is not in the carribean islands, but the bahamas are in this article) in particular, see fig. 3.2....
at least this give you a defensible reference, though you might want to err on the conservative side...for instance long island is partly at the 130 mph isotach, so 140 or 150 would be appropriate.
i tried to upload my copy of the pdf file, but it wouldn't take it so i'm providing a link for you to download the file...good luck.
ron, that's excellent! cheers!
paraphrased from the bahamas building code:
wind load [section 2009]
the provisions of asce7-02 shall be followed with the following modifications:
a) the design wind speed for all locations is 150 mph.
b) all buildings shall be considered to be at the hurricane coastline for purposes of application of the importance factor.
c) buildings in the coastal building zone shall be considered to be in exposure category d. the "coastal building zone" is defined as "the land from the mean high water line to a line 1500'-0" landwards or the entire island in question, whichever is less."
d) all buildings not in the coastal building zone shall be considered to be in exposure category c.
e) a 1/3 stress increase is permitted for any load combination that includes wind. this includes the d + w case unlike most current us codes. (section 2009.3)

ajh1..even better!
ron
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
design build huangyhg 产品功能分析 0 2009-09-08 05:13 PM
british wind loading codes huangyhg 产品功能分析 0 2009-09-07 05:19 PM
【转帖】memory leak issue yang686526 DirectDWG 0 2009-05-06 05:37 PM
【转帖】link error in building excustobjs-dll in vc8 yang686526 DirectDWG 0 2009-05-06 04:55 PM
【转帖】asme美国机械工程师标准目录2 huangyhg American standards 5 2009-04-26 02:38 PM


所有的时间均为北京时间。 现在的时间是 05:50 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多