几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-16, 12:21 AM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 soil nail wall deformation

soil nail wall deformation
see page 95 (pdf page 117) of the file at the following link.
the nail head does not move (except due to some elongation of the nail tendon). the shorcrete wall facing will try to push forward as the earth pressure builds up when additional excavation is performed in front of the wall. since the nail head remains relatively in the same location, it only appears that the nail head is moving inward. you will not notice this happen unless your nails are too far apart and you greatly underdesign the shotcrete which then starts bulging between nails.
i think the wall moves out and the soil nail stays where it is.
i agree 100%, but the from the figure, there is an "initital position" line and it clearly shows the nail head moving away from it... in the direction opposite to the load none the less
well, the figure is wrong.
seems like a pretty big mistake, not to mention a similar thing is shown in figure 5.20.
so i find it hard to believe that the figure is incorrect
sorry, i mean... i find it hard to believe that the figure is correct
ns4u,
i think you are absolutely right. the initial position should be moved to the right on fig. 518 (b). there is also a mistake on fig. 518 (a). the arrow pointing to the circle around the nail should be labeled "fracture on internal face".
looks like a slip in editing the document.
best regards,
ba
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
retaining wall retaining water huangyhg 产品功能分析 0 2009-09-15 06:41 PM
retaining wall near a river bank huangyhg 产品功能分析 0 2009-09-15 06:39 PM
masonry foundation wall huangyhg 产品功能分析 0 2009-09-10 12:40 PM
in enercalc masonry wall design, what is parapet heigh huangyhg 产品功能分析 0 2009-09-09 07:17 PM
foundation wall 40 feet below grade huangyhg 产品功能分析 0 2009-09-09 01:38 PM


所有的时间均为北京时间。 现在的时间是 02:48 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多