几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


 
 
主题工具 搜索本主题 显示模式
旧 2009-09-16, 01:18 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 ension only member design in high seismic zone

tension only member design in high seismic zone
hi,
any thoughts on design of bracing member in (high)seismic zone. aisc seismic provision (2005) restrict slenderness of v, inverted v bracings to 4*sqrt(e/f)for ocbf. is this not applicable to cross bracings. my understanding is, we can design bracing members as 'tension only' only if they are in diagonal (cross) configuration and there is no upper limit of the slenderness to it. where as v or inverted v type bracing should satisfy slenderness limit (as mentioned above) and should be designed for compressive forces, which means no 'tension only' analysis for these configuration.
i would be thankful for comments on this issue from you guys.
check out our whitepaper library.
i have not done much seismic design but this makes sense. chevron or k (what you call v) bracing needs to take compression to work, cross bracing does not.
i have heard someone mention a minimum slenderness ratio for tension members though - this is supposedly to minimise vibration.
csd
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
 


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
seismic zone maps where can i find huangyhg 产品功能分析 0 2009-09-15 09:11 PM
seismic zone design huangyhg 产品功能分析 0 2009-09-15 09:11 PM
seismic zone 3 and the ibc huangyhg 产品功能分析 0 2009-09-15 09:10 PM
design build huangyhg 产品功能分析 0 2009-09-08 05:13 PM
【转帖】asme美国机械工程师标准目录2 huangyhg American standards 5 2009-04-26 02:38 PM


所有的时间均为北京时间。 现在的时间是 02:31 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多