huangyhg

"> 最佳拟和
最佳拟和
我在建坐标的操作中发现迭带的下面还有最佳拟和,这个功能有什么用
简fff">单fff">的fff">说fff">就fff">是fff">坐fff">标fff">系fff">向fff">被fff">选fff">取fff">的fff">特fff">征fff">拟fff">合fff">·fff"> 对fff">于fff">单fff">一fff">特fff">征fff">来fff">说fff">他fff">将fff">使fff">坐fff">标fff">系fff">按fff">照fff">旋fff">转fff">，fff">平fff">移fff">使fff">被fff">选fff">取fff">的fff">特fff">征fff">在fff">新fff">坐fff">标fff">系fff">下fff">有fff">正fff">确fff">的fff">值fff">。fff">
列fff">如fff">：fff">使fff">用fff">最fff">佳fff">拟fff">合fff">2fff">dfff">平fff">移fff">-fff">-fff">被fff">选fff"> “fff">特fff">征fff">1fff">”fff"> 坐fff">标fff">为fff">理fff">论fff">：fff">1fff">0fff">，fff">0fff">，fff">0fff"> 实fff">际fff">测fff">量fff">为fff">：fff">9fff">，fff">0fff">，fff">0fff"> 工fff">作fff">激fff">活fff">工fff">作fff">面fff">为fff">zfff">。fff">那fff">么fff">坐fff">标fff">系fff">将fff">负fff">向fff">平fff">移fff">xfff">轴fff">1fff">mfff">mfff"> ，fff">使fff">新fff">的fff">坐fff">标fff">系fff">满fff">足fff">”fff">特fff">征fff">1fff">“fff">实fff">际fff">值fff">为fff">1fff">0fff">，fff">0fff">，fff">0fff">。fff">
如fff">果fff">选fff">择fff">了fff">多fff">个fff">特fff">征fff">（fff">如fff">果fff">选fff">择fff">最fff">小fff">2fff"> 乘fff">方fff">）fff">那fff">么fff">将fff">满fff">足fff">·fff">·fff">·fff">被fff">选fff">中fff">的fff">拟fff">合fff">特fff">征fff">在fff">
新fff">坐fff">标fff">系fff">下fff">按fff">照fff">最fff">小fff">2fff"> 乘fff">方fff">原fff">则fff">，fff">将fff">都fff">有fff">最fff">小fff">的fff">偏fff">差fff">
蛙跳测量fff">

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]