几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD/CAM/CMM » 精密机械
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-06, 09:39 AM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 variation of temperature with altitude on cold days

variation of temperature with altitude on cold days
hi everyone,
i'm currently modelling the effects of external ambient temperatures on an air vehicle. the problem that i have is that i cannot find any data for the variation of temperature with altitude where the sea level temperature is below 0 celcius, apart from a -40 celcius case. as you'll be aware on extreme cold days the temperature actually increases as you increase altitude over the first few thousand feet and then the temp starts decreasing again up to the troposphere.
does anyone have any suggestions on where this data may be available?
thanks in advance
tom
the us standard atmosphere model should also have data for other than standard temperatures.
there are a variety of programs than model the atmosphere. lowtran and modtran, while actually used for modelling electro-optical propagation in the atmosphere, contain simplified models of the atmosphere and do, model the temperature profile of the atmosphere.
ttfn
my guide here says that t(degreesr) = sea level ambient(degreesr) - (3.5662 * (altitude(ft) * 10-3)) good up to 36k ft.
benzie;
are you looking for (1) some worst rcorded case, or (2)a set of data where temp profiles are plotted versus probability?
fyi: faa part 25 airplanes have an allowable operating temperature range versus altitude chart in their flight manuals. it varies somewhat between manufacturers. i'm not sure of its exact origin, but i do know it goes back a long way and its tweaked a bit every now and then based on input from the airplane operators. so it represents a great deal of real world experience. some of the "biz" jets are certified to over 50,000ft. perhaps they are source for you.
this is what lowtran predicted for a mid-latitude summer run i made a long time ago, first column is altitude in km, temperature in kelvin:
0 294.2
1 289.7
2 285.2
3 279.2
4 273.2
5 267.2
6 261.2
7 254.7
8 248.2
9 241.7
10 235.3
11 228.8
12 222.3
13 215.8
14 215.7
15 215.7
16 215.7
17 215.7
18 216.8
19 217.9
20 219.2
21 220.4
22 221.6
23 222.8
24 223.9
25 225.1
30 233.7
35 245.2
40 257.5
45 269.9
50 275.7
70 218.1
100 190.5
if i can ever find a winter-specific run...
ttfn
guys, thanks for your answers. with the information that you've provided so far i've now got enough to go on. thanks again
the icao standard atmosphere (stal)is only designed to be used in the mid latitudes in spring and fall. it uses a standard temperature of 59 deg. f or 15 deg c at sea level, which is different to what other industries use, hence some of the programs do not work. the stal uses a dry air lapse rate (average decrease of temperature with altitude) of 3.566 deg f or 2 deg c per 1000 feet. this assumes perfectly dry air and no vertical or horizontal air movement. so the simple formula for temp. at altitude is 59-(3.566*alt in thousands)eg for 30000 feet (fl30) = 59-(3.566*30)=-48. this lapse rate continues to the tropopause where the temp. stops decreasing. this is about -69.7 deg f at approx. fl35 to fl65 in stal.
however, the height of the tropopause varies from 28000 feet at the poles to 54000 feet at the equator and it also varies from summer to winter.
at -40 you are 100 deg f below stal temp., so stal model will obviously not work. there are two ways to work around the problem. first you can use a different lapse rate. at -40 you are only 30 degrees f from tropopause temp. so if you estimate tropopause to be at 30000 feet then lapse rate will be 30/30 or -1 deg 1000 feet from ambient temp.
a more accurate approach is to contact an aviation weather office in your area. at several location around the world they launch balloons that measure the temp. with altitude. you could obtain prints of these from location (s)where the ground temp. is at which you that you are interested in and then determine a lapse rate.
cheers
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
【转帖】asme美国机械工程师标准目录2 huangyhg American standards 5 2009-04-26 02:38 PM


所有的时间均为北京时间。 现在的时间是 06:55 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多