几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD/CAM/CMM » 精密机械
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-06, 09:32 AM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 itanium bolt torque

titanium bolt torque
hello,
i am going to use titanium bolts to assemble two parts of an space equipment and l have the next doubt when l use self-locking nut:
if the applicable torque for the bolt is 11 n.m for m6 metric, should l increase this torque in order to take into account the running torque from friction in the thread due to the self-locking characteristic of the nut?
and if l have to increase that torque, how much?
thank you very much and best regards,
esteban
yes, you need to increase the torque to overcome the running torque. the increase should be equal to the running torque. if you don't know this value, you should perform testing to obtain it.
regards,
cory
thank you corypad,
but l wonder if there is another way to know the running torque applicable fopr and titanium bolt m*6, and not by testing.
thank you very much and best regards,
esteban
the torque is a function of the force you want to induce in the bolt:
m=kdp
where:
m - torque
k - a constant (ususlly 0.15 for lubricated, 0.2 for dry)
d - the nominal bolt diameter i.e 6 mm in your case
p - the force tou want to induce in the bolt
this torque should be added to the running torque just before the nut or the bolt head touches the bolted furfaces.
the k value may be different for titanium. unless you know the k value for the bolts you have, test few bolts until they break and then calculate the actual k. from now on you can use the formula for any force you desire.
celemin,
the prevailing torque (running torque) of a joint is a function of many variables and not easily calculable. you can ask the fastener supplier to provide an estimate, or ask them to perform the testing - many are willing to do this as a customer service.
regards,
cory
esteban
to calculate the running torque (class 11 torque) mentioned above you take a dial or blade type torque wrench and measure the torque needed to turn bolt just before bolt contacts the surface to which it will be tightened. the torque wrench must be calibrated and the reading, if possible, should be in the middle of the scale on the wrench. after taking a few readings you can average them and add this value to the value from the chart, and then torque the rest of the bolts to that value. as titanium should be lubricated with a moly type lubricant, it should be added before taking readings for running torque. titanium is suspectable to galling when tightening and should be tightened with hand tools only, no automotive type air tools etc. should be used, because you can be at the required torque but the bolt is not tight. it is best to tighten a bolt a few turns and then go to one diametrically oposite it (if round pattern) and then tighten it, continuing this until bolts are snug. similiarly when torquing it is best to torque in stages, for instance torque half the total value first time, then a value about half the remaining value, and finally the full value.
for information on errors in torque wrenches see website.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
hi torque slots huangyhg 精密机械 0 2009-09-05 10:56 PM
bolt strength reduction in shear lap joint with packer huangyhg 精密机械 0 2009-09-05 10:25 PM
orque callouts huangyhg tec-ease(America) 0 2009-09-05 01:33 PM
more about bolt circles huangyhg tec-ease(America) 0 2009-09-05 11:47 AM
【转帖】orque callouts yang686526 American standards 0 2009-05-04 10:54 AM


所有的时间均为北京时间。 现在的时间是 11:11 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多