几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-16, 11:46 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 yield stress of a572

yield stress of a572?
i am looking for yield stress of a572 or a588m at elevated temperatures (up to 900f). i know their yield stress at ambient is 50 ksi. i am a mechanical engineer and never used this material before. searched in asme section ii partd (material properties) coud not even find the material spec.
appreciate it..
check out our whitepaper library.
just a bump!
anyone knows the yield strength of a572 at higher temps.
thanks
you will need to get this data from the steel supplier or have your own tests done. also, the data will valid for that supplier only, as the various suppliers of hsla steels all have their own little chemistry and controlled cooling variations, which would have an effect on yield strength at 900f.
ref: asd 9th ed pg 6-3.
yield strength ratio for construction steels are:
at 800 deg f: .77
at 1000 deg f: .63
at 900 deg i would guess 70% of 50 ksi = 35 ksi yield
thanks a lot guys.
i used 35 ksi @ 900f per asd. makes sense.
for whatever reasons, some steel grades have been developed from a structural viewpoint, some from pressure vessel viewpoint. these are "structural", so don't get used in the tank/vessel market much yet. a516-70 is a common vessel plate that you don't see used structurally much.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
yield stress and steel design huangyhg 产品功能分析 0 2009-09-16 11:45 PM
what is the actual yield stress of a992 huangyhg 产品功能分析 0 2009-09-16 08:24 PM
stress for tubing huangyhg 产品功能分析 0 2009-09-16 10:38 AM
residual stress in bent steel huangyhg 产品功能分析 0 2009-09-15 06:22 PM
impact loads and strain rate dependent yield stress huangyhg 产品功能分析 0 2009-09-09 07:13 PM


所有的时间均为北京时间。 现在的时间是 11:56 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多