huangyhg

pc-dmis 3.6 mr1 发布了
rl="ft:ft.wilcoxassoc.com/v3.6_mr1/v36full.zi"]ft:ft.wilcoxassoc.com/v3.6_mr1/v36full.zi[/
rl="ft:files.wilcoxassoc.com/v3.6_mr1/v36full.zi"]ft:files.wilcoxassoc.com/v3.6_mr1/v36full.zi[/
rl="ft:ft.wilcoxassoc.com/v3.6_mr1/v36all.zi"]ft:ft.wilcoxassoc.com/v3.6_mr1/v36all.zi[/
rl="ft:files.wilcoxassoc.com/v3.6_mr1/v36all.zi"]ft:files.wilcoxassoc.com/v3.6_mr1/v36all.zi[/
全力下载中．．．．．．．．．．．
edited by - 80929 on 2004/09/23 19:54:02
version 3.6's mr1 contains these fixes and udates:
major enhancements
cad/grahics enhancements
enhancements focused toward users of ortable manual cmm's h as faro, romer, smx, kryton, etc.
controller secific scanning enhancements
fixes
major enhancements:
muti-arm cmm suort was exanded from 2 to 4 ossible cmms.
suort for renishaw s25 robe and the fcr25 tool changer.
chorus can be launched as a legacy roduct from within c-dmis. when the user exits chorus, c-dmis
will restart.
chorus settings migration allows migrating user settings from chorus that have a counter-art in
c-dmis. the user is romted if they would like to migrate their settings when chorus is detected on
a system and a new user launches c-dmis.
suort was added for chorus’ dmis extensions.
a new comment tye was added for directing outut to the robe readouts window.
an otion was added to comments to allow the user more control over which comments should aear in
the insection reort.
basic hits and move oints now have a relearn otion. when used with basic hits, the user is
romted to take a manual hit. the values from the hit taken by the user become the new nominal hit.
when used with moves, the user is romted to move the robe to the desired move oion at execute
time. this new location is saved and used during subsequent executions of the art rogram.
suort for the dea f-anel was added.
tutor/c-dmis translator first release allows imorting tutor art rograms within secific
limitations.
a cad imort wizard was added to simlify the rocess of imorting multile cad files.
many automation enhancements were added with a target of suorting blade measurement and nc
machining centers. secifically enhaced abilities in the evalutation of features and dimensions,
changing ti radii and offsets, an ability to execute a block of commands, a set hit method for
changing hit values, an ability to execute a cnc journal file, more access to various alication and
art rogram settings, and access to execution end condition information.
seed otimizations for evaluation of exressions.
dimensions have been made to aear red should one of the features on which they deend be deleted.
rofile dimensions have been enhanced to remember revious settings and to use an internal best fit
alignment during evaluation unless the users secifies otherwise.
a shutdown button was added to allow users to shut down c-dmis from a machine error dialog.
when entering a asswords for rotected settings, the assword are obscured by using the star (*)
character.
the alignment dialog automatically resets check boxes for ease of use.
the dimension information box style has been changed to be more aesthetically leasing.
hyer-view autoreorting has a new “use all viewsets mode” that creates a reort with one viewset
er age and uses all viewsets defined by the user in the art rogram.
a new save viewset button was added that simly overwrites the current viewset without any romt.
text box labels in the cad view now save visibility and oioning information for each view.
an outlier removal otion added to some constructed features.
the imort/exort dialogs have been re-designed and udated for ease of use and to imrove
organization.
a new exression allows extraction of high oints from a scans.
new exressions are available for getting all toggle string values.
new exressions give the ability to access qualification tool data.
exression can now set the internal dmis id of a tye.
exanded relative measure caabilities to allow the user to secify three different features to
reresent each rmeas axis.
the ability to grahically maniulate and delete hits from the autofeatures was added.
many more cmm models have been added for simulation.
toolchanger simulation has been added to the machine and robing simulation.
the machine setu dialog was redesigned to be more intuitive.
cad/grahics enhancements:
a new lane dislay mode can dislay lanes as a triangle or an outline of hits.
new cad selection methods for auto features can select a surface face with a hole in it and obtain the circle information needed for a circle or round slot. also, if the slot is made of different elements, h as arcs & lines, the new routine will find the round slot information with only one mouse click.
i-deas:
exort to i-deas dci.
an i-deas dci imort translator.
better suort for i-deas assembly files.
ungrahics:
added new register settings to allow users to secify from which ug layers to imort data.
a. 1-10 layers 1 thru 10
b. 1,3,5 layers 1, 3, and 5
c. 5-100 layers 5 thru 100
d. 200-256 layers 200 thru 256
new register settings allow users to secify whether to imort data from "invisible" layers.
new register settings allow users to secify whether to imort data from the "work" layers.
new register settings allow users to secify whether to imort data from "visible only" layers.
new register settings allow users to secify whether to imort data from "selectable" layers.
enhanced assembly file suort.
suort for unigrahics versions 16, 17, and 18 were fully imlemented.
suort for nx 1.0 (ug v19) and nx 2.0 was imlemented.
solidworks dci:
enhanced assembly file suort.
suort for solidworks 2001 lus s 06 and solidworks 2003 were imlemented.
enhancements focused toward users of ortable manual cmm's h as faro, romer, smx, kryton, etc.:
a new execution layout changes c-dmis so that the learn-time layout is different from the execute-time layout. the default execute layout, hides all toolbars and the edit window. it will maximize the cad view and cause the readouts window to dislay. the user can change the execute layout as desired during execution. any changes made will be used during subsequent executions.
new alignment buttons have been added to the quickstart toolbar for a 3-2-1 alignment and for a leafrog alignment. a cad=art otion has been added to the quickstart dialog when using the alignment buttons so that cad=art is art of the rocess. the 3-2-1 alignment allows the user to otionally add in rotational offsets and translate offsets by ressing the translate/rotate buttons.
a quick rint toolbar button has been added to the edit window toolbar that allows the user to rint a reort with the click of a button.
the install rogram was changed to detect configuration files that are art of the install set and install those files. c-dmis has been changed so that if it sees these files when a new users start c-dmis, it becomes their default configuration.
a new exandable status window was added that shows the status bar romts so a user can see romts from a distance.
quickstart buttons with wizards for all manual scans were added.
rubber-banding was added from the robe to cross sections during manual scanning. a multisection scan tye was added to manual scans allowing the user to scan across multile sections at a time when creating a manual scans.
imroved findnoms for scans allows the user to select the surfaces to use during the search for nominal data. if there are two surfaces that fall within the findnoms tolerance, the user can be asked which surface to use for the analysis.
controller secific scanning enhancements:
suort for the new vhss scan algorithm on brown & share / dea common (leitz) firmware controllers with firmware version 17 or later has been added.
to use the new algorithm there is a registry key, “variablehighseedscanning” in the [leitz] section. the default value is false to indicate the old high seed scan (hss) algorithm is in use.
when the vhss is enabled, it is ossible to secify if the returned oints are at “constant satial deny” (csd) or at “variable satial deny” (vsd).
by selecting the first otion, csd, the oint deny of the measured oints is ket constant during the scan (for instance, 1 oint er millimeter).
by selecting the second otion, vsd, the oint deny is modulated by the scan seed. that would mean that it is equal to the secified value at the nominal scanning seed (for instance 1 oint er millimeter), but where the seed is reduced because of the surface curvature, the distance between measured oints decreases roortionally to the seed.
this method for data acquiion may be selected to measure more oints where the curvature of the surface is strong while we accet to measure fewer oints where the art is more lanar. with the old hss, the only available method was the variable satial deny (vsd).
the hssdat scan method for circle basic scan on leitz (wetzlar) cmm’s has been susbistuted by the scadat cir command to enhance accuracy and machine resonse.
fixes:
roblem reorts fixed in version 3.6 mr1:
225739 gbar state still growing which slows down the system
225544 catia 5 r12 does not work in 3.6 release
223867 dci fli based on in/out of material
225294 the dimension of the true oion are not udated
226859 asi volcom is failing 100% of the time with an alication error
现在下载的好像不行吧，我也试过了，压缩文件是有加密的，我在刚发布的时候就下载过，可是我觉得3。6有个别功能还不如3。5的呢！
225544 catia 5 r12 does not work in 3.6 release 是何意?
可以在没有安装测量机的电脑上安装吗？没有什么限制吧？我也想装来学习学习。ez-dmis也不升级了。真是郁闷啦！
没有has你是休想成功滴！它是一只看门狗！
可以让厂家来给你免费升级，何必自己作呢。

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]