【转帖】limitation on adding blocks to block table
 

limitation on adding blocks to block table

limitation on adding blocks to block table
is there any limitation in adding the number of blocks to block table??
i am not able to add more than 69000 blocks to the block table. what could be the reason??
thanks in advance,
--hari

hariky
# 18th october 2004, 08:14 am

founding member join date: jun 2002
location: bulgaria
posts: 377
hi hari,
are you sure you need such large number of blocks in the block table. isn't it more likely that this number to be applicable to block inserts rather than for block definitions?
best regards
chudomir

chudo
# 18th october 2004, 08:59 pm

registered user join date: nov 2003
posts: 8

quote:
originally posted by chudo
hi hari,
are you sure you need such large number of blocks in the block table. isn't it more likely that this number to be applicable to block inserts rather than for block definitions?
hi chudomir,
yes i need to add so many blocks, some times it will be in lakhs also. and for every block i am adding an insert in the model space. but after around 69000 the add is failing. ??
and also i am seeing the svcs object still holding the memory after calling oduninitialize(). i am not seeing the memory decline in the taskmanager after releasing every thing. ??
thanks in advance,
--hari

hariky
# 19th october 2004, 01:40 am

founding member join date: jun 2002
location: bulgaria
posts: 377
hi hari,
well, if so, then some of the dwgdirect developers should help. but i think acad applications are not designed to work with so many blocks. i would recommend to think of some custom object, which will be able to store such large information. if you add only one insert for each of your blocks, then why it is needed to be a block at all?
as to the oduninitialize problem, first check one of the dwgdirect examples - whether the refcount is set to 0 in a common example. if so, then check whether you have stored the smart pointer to your services more than once somewhere.
best regards
chudomir

chudo
# 19th october 2004, 05:06 am

registered user join date: nov 2003
posts: 8

hi
by the time i call odinitialize(svcs), the svcs object is created and it says the m_nrefcounter = 1. any thing wrong?
thanks in advance
--hari

hariky
# 19th october 2004, 05:34 am

founding member join date: jun 2002
location: bulgaria
posts: 377
well, this is ok
best regards
chudomir

chudo
# 19th october 2004, 06:08 am

moderator join date: mar 2002
posts: 2,994
in dwg r13+ number of items in tables is stored as int32 but in dwg r12 table items are referenced by int16 index. so in r12 file number of table entries is limited by 65535.
do you have problems saving to r12 dwg?
sergey slezkin

sslezkin
# 19th october 2004, 08:48 pm

registered user join date: nov 2003
posts: 8

hi
i am using oddb::vac14 version to save. after some 69000 blocks, it is abruptly coming out on add() call to a block table saying "automation error, object disconnected from its clients" even oderror object is not reporting any error. ??
thanks in advance,
--hari

hariky

none
? | ?
thread tools



display modes
linear mode


search this thread

rate this thread
excellent
good
average
bad
terrible

posting rules
you may post new threads
you may post replies
you may post attachments
you may edit your posts
is on
are on
code is off
html code is off
forum jump
user control panel private messages subscriptions who's online search forums forums home general topics news questions and remarks business issues industry commentary general software issues documentation issues future directions dwg libraries dwgdirect.net dwgdirect, c++ version dwgdirectx, activex version adtdirect/c3ddirect opendwg toolkit/viewkit dgn libraries dgndirect, c++ version (2.x+) dgndirect libraries (legacy 0.99xx)
all times are gmt -7. the time now is 12:48 amfff">.
- - -
copyright ?2000 - 2009, jelsoft enterprises ltd.
copyright 1998-2008 open design alliance inc.
hi hari,
are you sure you need such large number of blocks in the block table. isn't it more likely that this number to be applicable to block inserts rather than for block definitions?
best regards
chudomir

quote:
originally posted by chudo
hi hari,
are you sure you need such large number of blocks in the block table. isn't it more likely that this number to be applicable to block inserts rather than for block definitions?
hi chudomir,
yes i need to add so many blocks, some times it will be in lakhs also. and for every block i am adding an insert in the model space. but after around 69000 the add is failing. ??
and also i am seeing the svcs object still holding the memory after calling oduninitialize(). i am not seeing the memory decline in the taskmanager after releasing every thing. ??
thanks in advance,
--hari
hi hari,
well, if so, then some of the dwgdirect developers should help. but i think acad applications are not designed to work with so many blocks. i would recommend to think of some custom object, which will be able to store such large information. if you add only one insert for each of your blocks, then why it is needed to be a block at all?
as to the oduninitialize problem, first check one of the dwgdirect examples - whether the refcount is set to 0 in a common example. if so, then check whether you have stored the smart pointer to your services more than once somewhere.
best regards
chudomir

hi
by the time i call odinitialize(svcs), the svcs object is created and it says the m_nrefcounter = 1. any thing wrong?
thanks in advance
--hari
well, this is ok
best regards
chudomir
in dwg r13+ number of items in tables is stored as int32 but in dwg r12 table items are referenced by int16 index. so in r12 file number of table entries is limited by 65535.
do you have problems saving to r12 dwg?
sergey slezkin

hi
i am using oddb::vac14 version to save. after some 69000 blocks, it is abruptly coming out on add() call to a block table saying "automation error, object disconnected from its clients" even oderror object is not reporting any error. ??
thanks in advance,
--hari