几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


 
 
主题工具 搜索本主题 显示模式
旧 2009-09-09, 07:22 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 inclined grade beam and pier foundation

inclined grade beam and pier foundation
when designing the foundation system for residential customer built house at the hill side with steep slop, say 25 degree, can the concrete grade beam be designed parallel to the slop in general (inclined the grade beam instead of stepping the grade beam)and connect the grade beam to the pier foundation as usual? any idea, experience, or suggestion? i am thinking of using step grade beam. however, the slop is too deep and regrade is kind of difficulty.
the wall form man would shoot you.
the optimist sees the glass as half full. the pessimist sees the glass as half empty. the engineer see the glass as too big.
the depth of the beam is all that matters. after determining the depth required, make that your minimum dimension. several steps could be used along the top of the beam. be sure to include the steps as extra dead load on the grade beam.
since you did not mention the framing material, i presume you are using masonry (wood framing wouldn't be an issue). make your steps in increments to match your cmus or bricks (usu modulo 8").
hope that helps! raf
to help me understand this better. what keeps the foundation from sliding? shear keys? friction/cohesion between foundation and soil?
typically in the san fran bay area, the scheme you have suggested is quite common. twelve-inch to 24" diameter drilled concrete piers with a constant depth (18" to 24") concrete grade beam following the pad grade. if the slope is more than about 6:1, you would want to specify that 2x flat blocking be placed on top of the mudsill between each cripple stud. grade beam forming of a constant depth on a slope is actually easier than trying to step the grade beam. of course, pouring a sloping beam presents other challenges, especially when the concrete mix is pumpable (frequently the case when on a slope).
james
sperlingpe - the pier or pile (or whatever foundation)supporting the beam should possess certain lateral resistance. regarding the whole horizontal reaction at a pier (or foundation), slope of a grade beam should not make big difference. like a simply supported stair stringer, the theoretical horizontal reaction under vertical load is also zero. but the inclined beam has a tendency to slide along the local longitudinal axis of the beam. anchorage against such a sliding possibility must be secured.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
 


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
horizontal thrust - rigid frame to concrete footing huangyhg 产品功能分析 0 2009-09-09 05:05 PM
foundation pier design huangyhg 产品功能分析 0 2009-09-09 01:35 PM
foundation designs for telecommunication towers huangyhg 产品功能分析 0 2009-09-09 01:29 PM
capacity of rubble stone foundation to support concentrated huangyhg 产品功能分析 0 2009-09-07 10:52 PM
analysis model of creep and shrinkage of a reinforced concre huangyhg 产品功能分析 0 2009-09-07 11:34 AM


所有的时间均为北京时间。 现在的时间是 03:08 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多