huangyhg

standards and practices of plastics
is there information and/or a book on dimensional tolerances
for plastics?
check out our whitepaper library.
what process are you looking for information on? injection molded plastics, machining plastics or some other process.
best regards,
heckler
sr. mechanical engineer
sw2005 sp 3.1 & pro/e 2001
dell precision 370
p4 3.6 ghz, 1gb ram
xp pro sp2.0
nivida quadro fx 1400
o
_`\(,_
(_)/ (_)
"there is no trouble so great or grave that cannot be much diminished by a nice cup of tea" bernard-paul heroux

injection molded plastics.
designing with plastics and composites handbook & modern plastics handbook are two books i use.
best regards,
heckler
sr. mechanical engineer
sw2005 sp 3.1 & pro/e 2001
dell precision 370
p4 3.6 ghz, 1gb ram
xp pro sp2.0
nivida quadro fx 1400
o
_`\(,_
(_)/ (_)
"there is no trouble so great or grave that cannot be much diminished by a nice cup of tea" bernard-paul heroux

thanks for your help. i found another one from spi.
standards & practices of plastics molders.
ag6533-
be careful about tolerances published by trade organizations such as these! they tend to publish tolerances that are very conservative. for example, the rma (rubber manufacturer's association) lists tolerances that are so coarse that one is tempted to rule out that family of materials. another fine example is nadca (north american die casters association). i discovered that the best source of information on d&t of injection molded parts is a knowledgeable, cooperative injection molder!
tunalover
promoting, selling, recruiting and student posting
are not allowed in the forums.
(add stickiness to your site by linking to this professionally managed technical forum)
title: drafting standards,
description: drafting standards, gd&t & tolerance analysis technical support forum and mutual help system for engineering professionals. selling and recruiting forbidden.

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]