几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-15, 07:34 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 rotated main beam - what is too much

rotated main beam - what is too much?
100+ year old home. main beam (7"x9") has rotated about 8 degrees out of the vertical. beam rests on brick piers that have wood shims (appeared to be tongue-0in-groove boards) on top.
i know that some beam rotation (especially for a solid member) can be expected; however, is there a practical limit?
any ideas on how to provide some bracing without replacement?
find a job or post a job opening
is there a reason to intervene, other than it looks twisted?
need more info, photos? 8 degrees, if the beam has remained square means the top edge of the beam rose almost an inch. any indication above of floor movement?
how long is the beam? is there any evidence of shims where the beam sits on the masonry piers?
a 7"x9" beam seems somewhat small for a main beam if it's 20' long and has a tributary area of 10'. it "seems" to be okay for a 10' long beam.
but as always, i could be wrong.
random comments based on questions posed:
1. beam is about 8 feet long - tributary loading is only about 12 feet.
2. when constructed, wood shims (actually a board) was installed on top of the column.
3. if i had to make an educated guess, this condition has been like this for some time.
4. unfortunately, photos taken did not come out.
5. previous owner installed 2 screw jack columns just to the inside of the brick piers under the beam section that is the most twisted (generally the middle of 3 sections - outer two sections are relatively plumb).
6. because the home was framed with recycled/reclaimed lumber (lack of uniformity; previous mortise and tenon holes in joists, etc), there are many shims/blocks between the joists and the tops of the beam.
7. there was no visible distress as a result.
my guess is to leave it along, though i wonder if placing a permanent column under the middle of the section that is twisted the most (to replace the ugly and unapproved screw jacks) would be a visually preferable alternative. i was not provided any reason why the jacks were installed.
i'm off on the deflection . . . obviously.
sorry.
sounds like a floor beam/joist. is there a wall on the beam? how about add another beam next to it?
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
question regarding floor support beam installation huangyhg 产品功能分析 0 2009-09-15 03:58 PM
help with composite beam huangyhg 产品功能分析 0 2009-09-09 04:15 PM
cantilevered steel i-beam capacity huangyhg 产品功能分析 0 2009-09-07 10:45 PM
beam strengthening huangyhg 产品功能分析 0 2009-09-07 03:04 PM
12 x 6.5x 38 thick x 41 residential basement i-beam con huangyhg 产品功能分析 0 2009-09-06 10:30 PM


所有的时间均为北京时间。 现在的时间是 02:42 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多