几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-07, 02:17 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 bank vaul

bank vault
we are in the process of designing a new bank building. the bank building will be built to florida building code standards, 2004 edition.
are there any structural vault standards that need to be followed?
can you provide me a reference document which identifies such requirements?
regards,
lutfi
i would think that surely the bank itself or the federal gov't has standards on vault construction, not from a structural standpoint, but from a security standpoint. and i would think that those standards would not be readily available to the general public for security reasons. have you gotten anything out of the bank on this?
there are requirements for the floors, walls, and ceilings. the last bank that the company i work for did had a 16" cast in place concrete floor with three layers of reinforcing (bars offset 4" in each direction) for security. the vault walls and ceiling were supplied by a vault company. other construction for the walls and ceiling are possible and the foremost concern is security. contact a vault company and ask the bank to contact their insurance company.
based on my experience, there is not a reference of "standard" details for security reasons. don't want to give criminals any ideas. most vault companies have a slab reinforcing requirement similar to what sperlingpe described. if the architect knows one or more vault manufacturers the bank is interested in using, you can contact them for recommendations. you may need embed plates in the slab for the walls, which are sometimes concrete tilt-up walls supplied by the vault manufacturer. at the vault door, you may need a thickened slab and a steel plate to accommodate the door installation.
thanks for the input. obviously the construction standard is more for security reasons than structural!
i agree with your input. i know there is a federal standards for vault containing classified materials. i have done some class 鈥淎鈥?vaults. i also know that astm has some specs for vaults as well.
i am not aware of a standard, if there was one; i wanted to know about it.
regards,
lutfi
i saw a plan for a fed. reserve bank once. the designer put the sanitary and storm drains into deep tunnels. 90 feet below street level. then designed a real nice drift with reinforcing from the two tunnels back to the basement level of the bank. i asked what would stop someone from walking into the bank from the tunnel. they decided to change that detail. so i'd say there is only common sense available for design.
richard a. cornelius, p.e.
we have designed more than a few bank vaults and rather simply. using common sense and judgement. 12" thick cip walls with #6 reinforcing bars at 6" o.c.e.w.. then had the layers offset from each other 3". creating a 3" grid.
i worked on a big bank vault a couple of years ago. the vault was c.i.p. with 2鈥?thick walls 30鈥?tall with 5 mats of #5 bars at 3鈥?o.c.e.w. each mat was shifted 1鈥?so as to make for a virtual curtain of iron. besides that the big room next to the vault was a gun range with guards practicing with fully automatic machine guns.
with the few banks i've worked on, the architect would select a vault manufacturer who would then supply us with the details they needed. these include the slab design under the vault and any embeds or other material necessary for the connection of the vault
ucfse,
you are correct and this is what we are in the process of doing. we contacted the architect and he is working on getting the data from the vault supplier.
i am still curious if there is a published standard or reference though!
regards,
lutfi
i think there may be a ul listing they reference i am not sure
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
bank vault loads huangyhg 产品功能分析 0 2009-09-07 02:16 PM
bank vault design huangyhg 产品功能分析 0 2009-09-07 02:16 PM
【转帖】determine if user is logged into pdmworks vaul yang686526 SolidWorks二次开发 0 2009-04-13 10:18 AM
【转帖】bulk change descriptions for files in the vaul yang686526 SolidWorks二次开发 0 2009-04-13 09:23 AM
【转帖】checking new docs into vaul yang686526 SolidWorks二次开发 0 2009-04-12 08:26 PM


所有的时间均为北京时间。 现在的时间是 05:53 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多