几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


 
 
主题工具 搜索本主题 显示模式
旧 2009-09-08, 10:15 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 empire state building - wind deflection

empire state building - wind deflection.
today i was asked by my daughter - how far does the esb sway due to wind ?. (one of her neighbours had suggested three metres !!).
tall buildings are not in my area of expertise, so i visited the esb official web site, and found this:
"the empire state building does not sway...it gives.
with a wind of 110 miles per hour, the building gives 1.48 inches.
movement off centre is never greater than one quarter inch, thus measurable movement is only one half inch, one quarter inch on each side".
on the face of it, there seems to be an inconsistency here (unless this is a pure pr statement, in which i ought not to expect fact or logic?).
i can live with the semantic refusal to call deflection under wind a "sway", (presumably the pr team at work?). however, i would welcome any explanation how the maximum deflection can be quoted as 1.48" in one sentence, and 0.25" in the next.
wouldn't even 1.48" be remarkably low for a 1250 foot high building?
austim, even more remarkable is that in the late 40s or early 50s the esb was hit by a war plane and even more incredible the damage was very local.
if you're an "experienced" engineer like me you might just re
it's not obvious that there is an inconsistency. it may very well be that the building "gives", e.g., deforms under wind load, so that the windward wall moves 1.48 in, but the cg only sways 0.25 in.
a deflection index of h/500 is considered pretty good based on additional stiffening being provided from interior partitions and masonry cladding, which the original esb had in spades. i suspect the 0.50 inch value is the interstory deflection.
a total sway of 2.5 - 3.0 feet would not be extraordinary, and may in fact be a lower bound value.
more speculation...the esb has a very heavy stone facade, which would tend to decrease its response to vortex shedding and other oscillating wind effects.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
 


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
design of building for both wind and sesimic huangyhg 产品功能分析 0 2009-09-08 05:35 PM
deflection of beam supporting a concrete slab huangyhg 产品功能分析 0 2009-09-08 04:57 PM
building dimensions to consider when finding wind loads huangyhg 产品功能分析 0 2009-09-07 05:36 PM
british wind loading codes huangyhg 产品功能分析 0 2009-09-07 05:19 PM
brick cladding deflection limits huangyhg 产品功能分析 0 2009-09-07 04:48 PM


所有的时间均为北京时间。 现在的时间是 12:58 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多