几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-09, 08:46 AM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 evidence of 2nd flr floor joists seen in first flr ceiling s

evidence of 2nd flr floor joists seen in first flr ceiling s
i currently had a home inspected for purcahse.
4 bedroom center hall colonial.
year built 1970. northeastern new jersey.
the area of concern is the family room ceiling (family room is 13'w x 21'l).
the inspector observed the following. at the separating wall (between living room and family room)21' dimension and the outside wall (opposite separating wall) 21' dimension the second floor bedroom floor joists can be observed as though they are pushing down on the sheetrock ceiling of the family room. one can observe the narrow side (2" dimension)of the joists (16" inch on center i beleive)in the sheetrock at the 90 degree intersections of the common wall and ceiling and the outside wall and ceiling the entire 21' length of the walls. there was no observation of the joist in mid span of the family room ceiling. the second floor bedroom above the family room is at a different elevation (one step up) from the rest of the rooms on the second level. there was no apparent evidence on the second floor of any major shift or settling. no visible foundation cracks. any ideas as to why this may have happened?
could the joist be cracked?
take a wallboard saw and remove a piece of the ceiling. that way, you can really assess what is happening. structural engineers do not have x-ray vision.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭



所有的时间均为北京时间。 现在的时间是 02:47 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多