几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-10, 02:46 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 moisture on wood floor

moisture on wood floor
i have a project where the homeowner wants to put a bedroom over top of half of his heated indoor pool. any suggestions on what can be done to reduce the amount of moisture on the bedroom floor due to the humidity? my initial thought was a vapor barrier and green board on the ceiling below, but maybe there is a better solution.
some things to consider in rooms with high moisture content, particularly indoor pools that not only produce high levels of humidity, but with the water vapor, also contain corrosives (chlorine).
1. water vapor will permeate through common building materials and condensate against non-permeable materials (plastic vapor barrier). once water vapor has condensated in sufficient quantities, water will drip or run off.
2. structures such as enclosed ceilings above high humidity prone areas will become collectors for water. this will encourage decay and fungus damage if framing
i agree with the above answer.
the suggestion i make may be overkill [depending on the size of project and/or budget constraints]. suggest to owner/architect to consult with a good mechanical engineer to design hvac system. the design of the structure should take into account the environment. the structure does not eliminate the effects of the environment on the structure.
regardless of what material you put on the ceiling/floor, if the ventalation is in adequate, you will have problems. have the owner hire a mech eng w/ experience in indoor pools.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
moisture decay 9dry-rot0 of wood sill plates huangyhg 产品功能分析 0 2009-09-10 02:45 PM
masonry wall with wood supports for roof huangyhg 产品功能分析 0 2009-09-10 01:01 PM
concrete slab - need low moisture for floor finish huangyhg 产品功能分析 0 2009-09-08 12:38 PM
brick cladded wood studs huangyhg 产品功能分析 0 2009-09-07 04:47 PM
allowable floor deflections versus workmanship standares huangyhg 产品功能分析 0 2009-09-07 10:58 AM


所有的时间均为北京时间。 现在的时间是 10:21 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多