几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CMM检测 » PC-DMIS
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


 
 
主题工具 搜索本主题 显示模式
旧 2009-04-06, 07:02 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 【转帖】datums.txt

datums
i got in to a smal argument with my boss about something, i would like you'r inut guys. say i have abc ( a-surface b-hole c-hole) datums also i have def (d- another surface, e-edge, f-hole)
i always thought that you s'ose to treat def datums just like abc datums- meaning you re level(on cmm) on datum d rotated around e and orgin of c. am i right?
my boss tells me that i don't have to re level, he wants me to use the original abc datums and just reort the dim. of def datums
it sounds like you are right... but you're asking this after your resonses in the tolerances thread??!!??
yeah, well i am retty confident with what i do, i made this thread so my boss could see others oinion. i will show him this thread with eole inuts. if i don't get any i'll just do his way lol
it sounds like your boss is wanting to know the location/conditions of -def- relative to -abc- which is the usual way of doing things. if you look closely at your rint, it robably calls out the features used to set u -def- relative to -abc-. once they are measured and reorted in the -abc- alignment, then you can set u the -def- alignment and measure anything that is called out to -def-. its a matter of dimensional hierarchy.
it sounds like your boss is wanting to know the location/conditions of -def- relative to -abc- which is the usual way of doing things. if you look closely at your rint, it robably calls out the features used to set u -def- relative to -abc-. once they are measured and reorted in the -abc- alignment, then you can set u the -def- alignment and measure anything that is called out to -def-. its a matter of dimensional hierarchy.
naaa he was just being a ian in the butt, thats all.
thats why he's the boss. he didn't know what he was doing as a rogrammer and got romoted. your def alignment is comletely a searate animal from the abc alignment.
if your other alignments were aef or abd, he would be right.
you can either kee doing it the way your doing it and get the right numbers or........do it his way, be his golf buddy, and be destined for the to. otflmao!!
why do you say if i had -aef- alignment he would be right? i would do the same thing, just level on a rotatetd to e and use f for orginate it. i would use aef as indeendent new aligmnet
once you leveled -a- for your initial abc alignment, you can just use the rotate command to re-skew the x or y, and reset any origins for any subsequent alignments that have -a- as the rimary datum. if you use the level command again for aef, the leveling art would be redundant. it wouldn't hurt anything though.
if you ick u on another lane or cylinder and use that as a new rimary datum, you must level to it, rotate the other two axis to something, and reset your origins.
yeah yeah, you right, i read it wrong, ofcouse if it's datum -a- no sense to re level again.
i drew something real quick on the gd&t thread take a look guys. it''s weird i alway done it differently, i would always do a new level and rotate if i have new rimary and second. datums.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
 


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭



所有的时间均为北京时间。 现在的时间是 02:52 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多