几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-07, 04:36 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 brace loads

brace loads
could i roughly calc a brace compression load by splitting the beam in two & treating the brace end as an end support & resolving for the angled load. or do you steelwork guys use another formulae for finding brace loads?
as a seperate question, what is the effective length of beam under the loads. i would guess if the brace is strong enough then l is the distance between the end support & the point where the brace hits the beam?
cheers
these braces are installed for lateral loads not vertical. also if this is in a seismic zone then the brace configuration needs to be designed for ductility, energy dissipation and have sufficient buckling restraint in order to achieve plastic hinge capacity.
this seismic stuff is mostly above my head and i would say way above your level of structural knowledge.
effective length is complicated on this and could be longer than the actual length depending on how restrained the beam is.
it will be better and almost as maybe even quicker to make a model in a program. include p-delta and then assume k=1 between nodes.
p-delta analysis brings the structure to a stable deformed state as if nodes are prevented of further lateral movement, i.e., a non-sway braced state, so k=1 is safe.
all this assuming forces standing in the section do not require axial and bending stiffess degradation to properly account for material nonlinearities, in which case such degradation should be considered with properly corrected input data.
ishvaaag,
only problem is the effect of out of plane buckling if it is analysed as a plane frame. just re
hey, hey, hey. remember i'm a mechanical boy not a steelwork guru. i only wanted simple answers. ah! just spotted the op is an me - excellent
cds72, your original answer satisfies me.
thanks
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
brace footings huangyhg 产品功能分析 0 2009-09-07 04:35 PM
asce figure 6-10 wind loads huangyhg 产品功能分析 0 2009-09-07 01:22 PM
are asce 7-02 wind loads ultimate or service level huangyhg 产品功能分析 0 2009-09-07 12:46 PM
allowable deflection on steel knee brace huangyhg 产品功能分析 0 2009-09-07 10:56 AM
aisc appendix 6 - beam bracing huangyhg 产品功能分析 0 2009-09-07 10:34 AM


所有的时间均为北京时间。 现在的时间是 02:42 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多