几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


回复
 
主题工具 搜索本主题 显示模式
旧 2009-09-08, 03:52 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 creep and shrinkage at crack section

creep and shrinkage at crack section
hi fellows
i am designing the bearing pad support the bridge beam. and i have a question about the creep and shrinkage displacement at the bottom of the beam.
my case is, the prestress beam i designed is allow the cracking under the full loading, and my question is after the beam cracked at the bottome of the beam, will there be any more shrinkage and creep at the bottom of the beam to cause movement at the support (which betweem the beam and the pad), or the shrinkage and creep only affect the top of the beam to the neutral axis in a crack section?
in my situation, the creep by prestress at the bottom of the beam is at the same way as the shrinkage before the section crack under the dead load itself.(member hog at this time, bottom stress act compressive, so the strain is toward each other at the support). after traffic loading, the section crack, this is what i am not understand the creep and shrinkage strain movement at the support after the concrete is flexure cracked.
for designing the bearing pad size, i need to find out the shear strain due to tangential movements and forces.
thank you

powerranger
i think you are overthinking the problem. creep and shrinkage deflections are time dependent. the pci handbook details how to calculate the overall deflections taking the creep and shinkage into account and what factors should be used at release, erection and final. this information is used to determine the beam seat elevation, which is critical to ensure your deck geometry is correct.
to design the bearing the beam data you need is dead and live load(no impact), thermal movement of the span(+ any sustained horizontal movement) , and the overall deflection at erection of the beam with the full deadload (non-composite) applied and the rotation of the bearing due to this loading. aashto 17 edition chapter 14 details the design requirements (14.6.5 or 14.6.6 elastomeric pads method a or b.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
回复


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
creep analysis huangyhg 产品功能分析 0 2009-09-08 03:51 PM
crack control in pt slab huangyhg 产品功能分析 0 2009-09-08 02:18 PM
chapter 4 preliminary design properties of concrete huangyhg 产品功能分析 0 2009-09-07 11:23 PM
analysis model of creep and shrinkage of a reinforced concre huangyhg 产品功能分析 0 2009-09-07 11:34 AM


所有的时间均为北京时间。 现在的时间是 03:51 PM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多