几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量  


返回   几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 » 三维空间:产品设计或CAX软件使用 » CAD设计 » 产品功能分析
用户名
密码
注册 帮助 会员 日历 银行 搜索 今日新帖 标记论坛为已读


 
 
主题工具 搜索本主题 显示模式
旧 2009-09-09, 06:01 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 hs20-44 truck tire spacing

hs20-44 truck tire spacing
does anyone know the o.c. spacing between the 2 outer tires on either side of the rear axles?
find a job or post a job opening
its about 18" center to center. the tires are about 8-10 inches wide and there is another 4-6 inches of gap created by the axle.
the rear tires are spaced at 6'-0" o.c. per figure 3.7.7a of the standard specs (17th ed.). the tire contact area can be found in aashto 3.30, and comes out to around 10 inches in the direction of travel, and 20 inches wide.
i'm sure these same values are buried somewhere in the aashto lrfd specs, too.

for design purposes the spacing is 6' as crossframe state; the overall width of the truck is taken as 10'.
the spacing of the outer wheels is not relevant for design; it's not a real truck.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)
 


主题工具 搜索本主题
搜索本主题:

高级搜索
显示模式

发帖规则
不可以发表新主题
不可以回复主题
不可以上传附件
不可以编辑您的帖子

vB 代码开启
[IMG]代码开启
HTML代码关闭

相似的主题
主题 主题发起者 论坛 回复 最后发表
floor joist spacing huangyhg 产品功能分析 0 2009-09-09 12:44 PM
fire truck loading huangyhg 产品功能分析 0 2009-09-09 12:01 PM
dump truck axle loading - while dumping huangyhg 产品功能分析 0 2009-09-08 07:56 PM
correct column tie spacing huangyhg 产品功能分析 0 2009-09-08 02:04 PM
concrete slab and truck load during construction huangyhg 产品功能分析 0 2009-09-08 12:39 PM


所有的时间均为北京时间。 现在的时间是 05:18 AM.


于2004年创办,几何尺寸与公差论坛"致力于产品几何量公差标准GD&T | GPS研究/CAD设计/CAM加工/CMM测量"。免责声明:论坛严禁发布色情反动言论及有关违反国家法律法规内容!情节严重者提供其IP,并配合相关部门进行严厉查处,若內容有涉及侵权,请立即联系我们QQ:44671734。注:此论坛须管理员验证方可发帖。
沪ICP备06057009号-2
更多